10 HP Rotary Phase Converter

GP10NL

Phoenix Phase Converters

  • $1,126.08
  • Save $450.43

Only 9 left!

If you are looking for a reliable 3 HP Phase Converter, then look no further. We give you custom options to ensure you get the features and specifications you need to run your valuable equipment.  

Our Converters

 

 Generator/Idler

Cast Iron Frame, Corrosion Resistant Hardware, Stainless Steel Connection Plate, Cast Iron Conduit Box, Over Sized Bearings, Cast Iron Inner & Outer Bearing Retainers, Vacuum Impregnated Windings, 4140 Steel Shaft Rotor Generator is made to preform in a wide range of environments and we prepare them for the task. From the cast iron frame and dual over-sized bearings and seals. This generator is ready for the toughest environments.


Power Block

We use a terminal block that is a convenient way to manage your power distribution needs. Rated for copper or aluminum conductors, Tin-plated, Easy Connection, non-corrosive and oversized. We use this block with the consumer in mind, makes your installation easy, fast, and secure.


 Totally Enclosed, Fan Cooled

Cast Iron Frame, Corrosion Resistant Hardware, Stainless Steel Connection Plate, Cast Iron Conduit Box, Over Sized Bearings, Cast Iron Inner & Outer Bearing Retainers, Vacuum Impregnated Windings, 4140 Steel Shaft Rotor Generator is made to preform in a wide range of environments and we prepare them for the task. From the cast iron frame and dual oversized bearings and seals. This generator is ready for the toughest environments.


 Voltage Panel Display

Either monitor your single phase voltage or your generated phase for consistency, backlight, make it easy to see. Without opening up any covers and using a voltmeter you can always see that the phase converter is working properly for your equipment. It will shut on and off with your phase converter.

Optional Push Button Control

Whether you are in a rural area or not, voltage drops or dips can occur, this will protect the component inside the phase converter, it will also protect against overloading the phase converter. This will help eliminate costly labor, material, and down time. Easy way to turn on the phase converter with out using a disconnect or breaker to power the phase converter, it also provides a level of safety, if the event you ever lose power, the phase converter will stay off when the power is restored.


 Wiring

We are neat freaks! Not a single phase converter leaves our facility, unless it is absolutely perfect, no crossed wires, secure tied downs, all hand built and goes through a four level inspection process right before it is packaged and shipped. Heavy gauge wire and thick insulation, resistant to heat and moisture.

Enclosure

Heavy gauge steel frame design, powder-coated to prevent corrosion, exceeding NEMA 3R standards for outdoor applications, all tig welded corners, we design the enclosure to last and look like new for many years.

 _________________________________________________________________________

 

Hinged Cover

Either from installation or servicing to a clean look we have added two and very durable metal powder-coated hinges, eliminating many screws from our previous design makes it easy to access and manage getting inside the phase converter panel.

 

 _________________________________________________________________________ 

Capacitor Bank and Holders

Stress free and secure, another one our great approvement from our previous design.

Product Videos

Installation Video - Rotary Phase Converter with Push Button Controls from Phoenix Phase Converters on Vimeo.

 Why our Generators are Superior to our Competition

Sizing

GP10 BEST SIZED FOR: 
Best Performance Single Motor Start: 2.5HP
Recommended 3 Phase Sizing:  7 amps
Total Combined Load: Please Call for Sizing (800) 417-6568

Easy Loads up to 7.5 HP Table Saw, Drill Press, Milling Machine
Medium Loads up to 5 HP Belt Sander, Grinder, Mixer, Lathe
Hard Loads up to 3 HP  Dust Collector, Fan
Very Hard Loads up to 4 HP Compressors

Resistive Loads up to 14 amps

PL-5 SPECS(Download Spec Sheet)pl5 ul-5  ul5

Minimum Single Phase Input Circuit  15 Amps

Single Phase Input Voltage:   208 245 Volts

3 Phase Output Voltage:   208 245 (Based on Input)

Voltage Balance:   2 5%

Idler HP Size:   10

Model:   GP10

 


We Also Recommend